Chuxco and American Labs offers a full range of SURPLUS GROUND SUPPORT EQUIPMENT to keep your plant up and running.
Red Oil Equipment and Conversions
Industrial and Aerospace Equipment
Hydraulic Repair Services/Troubleshooting
Hydraulic Test Stands (Stationary & Portable)
Pneumatic Test Stands
Proof & Burst Test Stands
Special Test Equipment
SKYDROL Media Equipment and Conversions
We can use your schematics or our engineers will work with you on your design requirements.
CURRENT EQUIPMENT OFFERINGS: (WAY TOO MUCH AVAILABLE INVENTORY TO LIST HERE. PLEASE CONTACT US WITH YOUR REQUIREMENTS)
TSH-F18-101 Universal Linear and Rotary Actuator Test Stand
This item provides a means for dynamic testing of a wide range of conventional style linear and rotary actuators including screw jacks falling within the specified limits shown. A force ranging from zero to a maximum of 30,000 lbs. in either tension or compression, the EHTS provides for testing units having an overall maximum length of 44″, a maximum stroke of 12″, and a maximum rate of travel of 4″ sec about the longitudinal axis of the loaded column. Test stand is capable of driving screw jacks at a constant rate for each load condition with measured input torques ranging from zero to full load. The EHTS test system is a universal hydraulic system equipped with computer self-test and calibration programs. The fully automated system commands flow-press temperature and test conditions such as cycle proof dynamic and static test conditions all transducers, flowmeters , servo valves, press control valves can be self-tested and calibrated without removing components from the system, the stand is rated for F-18 C + D and E + F primary and secondary actuators, nose gear flaps, actuators for F18 C + D Aircraft.
65 GPM, 6000 PSI
MANUFACTURE: H.R. TEXTRON
SHOWN AS- USED EXCELLENT CONDITION/LOW TIME
PRODUCT TYPE- TEST STAND
ELECTRONIC CONTROL CONSOLE PART NO. 88006980-101
MODEL NO. F-18 HORNET AIRCRAFT
OLD STYLE DYNAMIC BUT FULLY UP-GRADABLE COMPUTER SYSTEM
EHTS TEST FIXTURE AND HYDRAULIC SUPPLY
87RM233 Stationary “UNIVERSAL” Wide Body Aircraft Components Test Stand
Stationary “UNIVERSAL” Wide Body Aircraft Components Test Stand. Available in skydrol fluid media, or other fluid applications upon request. This stainless steel test stand is rated 50 GPM and designed to test: actuators, valves, pumps, hose assemblies and related components to 3000 PSI with a proof test circuit to 10,000 PSI. This Dual System unit offers 2 test stations each able to provide 0/25 GPM and 0/3000 PSI which may be combined for a total 50 GPM and 3000 PSI flow test. The pump test circuit is controlled by a “State of the Art” variable frequency drive with standard aircraft adapter pump mount.
TSH-111-10 Hydraulic Test Stand Blue
This Power Unit is capable of testing actuators, valves, accumulators, and hoses, and has a 600 series Denison variable volume pressure compensated pump. It also includes a high pressure filter (3 micron), low pressure filter (10 micron), water heat exchanger, relief valve, check valve, drain valve, 60 gallon reservoir, electrical control enclosure with starter, fuses, and relay.
TSH-106 Universal Hydraulic Test Stand w/ Pump Test Drive
The Test Stand is designed for performance testing on aircraft hydraulic system components such as valves, actuating cylinders, solenoid valves, reservoirs, accumulators, and pumps, using hydraulic fluid, Specification Mil-H5506, Mil-H5083, and Mil-H-83282 at operating temperatures between 100º and 1600° F
ALS S404 Hydraulic Test Cart
All Components are housed in an all steel cabinet of welded and bolted construction. Doors are provided to allow instant access to the interior of the machine for periodic inspection and service. The unit is compact, lightweight, and mounted on rubber tire wheels. Power supplied by a air operated pump. Hydraulic pressure is controlled by means of air pressure regulator.
TSVD-101 Dual Head System Aircraft Generator Test Stand
This equipment is used for testing AC and DC generators. The unit is mounted on a steel skid with blower motor, drive motors and motor starters. The control panel includes switches, meters and connectors. The unit is designed to operate on: 220/440 vac 50/60 HZ, 3 phase power. But may be modified and up graded for other service on request.
Free Standing 3 System Central Power Unit
3 System power unit, capable of 50 GPM @ 3000 psi with 5000 PSI available at reduced flows. Consisting of the following components:
A215 PDQ Test Stand Blue
The model A215 is used in support of Boeing and Air Bus. It is a generic unit, simple to operate and will meet the basic test requirements for the above aircraft. The model A215-Universal is used on all Douglas Aircraft requiring It-Can tests.
SCN-101 Pneumatic Nitrogen Carts
We have access to way too much inventory to list here.
Please contact us with your specific requirements.
Top Reasons to Buy from Chuxco and American Labs
- Unbeatable Prices…. We will meet or beat the competition by offering equal or superior quality components and equipment for less.
- Solid Track Record…. we have 100’s of documented references we have earned many letters of recommendation from industry leaders.
- Two Established 40 Year Old Companies….. We are here to maintain your growing needs.
- Support US Based Minority Owned Small Business….. We help support the local economy and provide good paying jobs for the local communities.
- Hundreds of Years of Experiences…Combined managerial personal experiences and skills totaling over 100 years.
- Top flight NASA Trained Engineering Staff. Mike Curry the President of American Labs worked as an engineer for NASA.
Call us at (844) 747-7377 to set up a meeting to discuss your existing aviation hydraulic test stands and equipment needs, or contact us for more information.